Shelby Township HVAC Company handles heating and cooling work for homes and businesses across Shelby Township and Macomb County, from a single repair call to a full system replacement. We cover AC repair, furnace service, heat pump work, ductwork, thermostats, indoor air quality, and seasonal maintenance, all scheduled through one call. We are available every day from 5:30 AM to 10:00 PM.
Call for a quote at (586) 789-9445.
Your home deserves heating and cooling that runs right, and so does every commercial property or rental unit you are responsible for. Whether the system is acting up mid-season or it is time to replace equipment that has run its course, we handle the full range of residential and commercial HVAC work.
Here is what we take care of:
We'll go through what the service covers before it is booked.
Systems around here run into the same few faults, and in Macomb County those faults do not wait for a convenient hour. A furnace that stops working on a January night in Shelby Township is not a problem you can put off until Monday, and an AC that fails during a humid Michigan summer makes a house genuinely uncomfortable fast.
Emergency no-heat and no-cool calls are taken seriously. We are available every day from 5:30 AM to 10:00 PM, and when you call you get a real conversation about what is happening with the system, not a voicemail.
Describe the fault. Hear what it involves. Decide from there.
Give us a call and we will take care of it.
Shelby Township winters are long and genuinely cold. Temperatures drop well below freezing for weeks at a time, which puts real pressure on heating equipment. Cold-climate heat pump technology has also changed what is possible here, and whole-home humidity becomes a real comfort issue the moment the furnace runs hard. The three services below come up constantly in this area for good reason.
A system's age says a lot about which repair makes sense, and a furnace call usually starts with understanding both. When the furnace is not working, the person who comes out checks the heat exchanger for cracks, tests the igniter, inspects the burner assembly, and looks at the blower motor and controls. Most no-heat calls trace back to one of those components.
Whether repair or replacement makes more sense depends on how old the system is, what the repair will cost relative to a new unit, and how efficiently the current equipment is running. An older furnace running at low efficiency costs more every month than a newer one would. When replacement is the right call, you get a written scope on installation work before anything is scheduled, so the job is defined before it starts.
Pick up the phone and we'll get started.
Older heat pump technology struggled once outdoor temperatures dropped below freezing, which made heat pumps a hard sell in Michigan for a long time. Cold-climate heat pumps are rated to operate efficiently down to roughly -15 degrees Fahrenheit, which changes the picture entirely for Shelby Township homeowners.
These systems run in both heating and cooling modes, which makes them a practical year-round option. For spaces without existing ductwork, a ductless mini-split handles the same job room by room, and it works well for additions, finished basements, or detached spaces that the main system does not reach. We scope the installation to the space and the equipment, and we keep the conversation focused on what the unit does and what it will cost.
We'll go through what the service covers before it is booked.
A heating or cooling fault is easier to explain than most people expect. The same is true for dry indoor air in winter. Forced-air furnaces pull moisture out of the air as they heat, and by mid-January a house in Macomb County can drop to humidity levels that dry out woodwork, irritate airways, and make the air feel colder than it actually is.
A whole-home humidifier ties directly into the furnace or air handler and conditions the air across the whole house, which a portable unit sitting in one room cannot do. The humidity level is set on the thermostat or control panel, and the system handles the rest. We also install air filtration and air quality equipment on the same visit when it makes sense, since the ductwork is already accessible and the two upgrades work together.
From a quick tune-up to a whole-system replacement, the diagnosis comes first, and that applies whether we are working in a single-family home, a rental unit, or a commercial building.
For homeowners, the most common calls involve a system that stopped working, a unit that is not keeping up, or equipment that is old enough that the next repair does not make financial sense. We walk through the options on the call so you know what you are deciding before anyone comes out.
For property managers, landlords, and commercial clients, the process works the same way. We scope the job on the call, confirm what the visit covers, and provide a written scope on installation work so there is a clear record of what was agreed. Multi-unit properties and commercial spaces often have more than one system to consider, and we handle that conversation before anything is scheduled.
Scheduling an HVAC tech shouldn't be complicated. Call us, describe what the system is doing, and we will go through what the service involves and what it costs before you book anything.
For repair calls, there is a diagnostic or service-call fee that covers the visit and the assessment. That fee is explained on the call, not after the fact. What the repair costs beyond that depends on what the system needs: the type of equipment, the part involved, and whether the job is a straightforward fix or something more involved.
For installation and replacement work, pricing depends on the equipment selected, the scope of the job, and any ductwork or accessory work that is part of the project. We quote based on what we actually find, not a number pulled from a general range.
We check the furnace. We check the AC. We leave it running right.
Shelby Township is our primary service area, and we cover Macomb County broadly for both residential and commercial work. That includes Sterling Heights, Utica, Romeo, Washington Township, Chesterfield Township, Clinton Township, Troy, and Auburn Hills.
If you are in the area and need heating or cooling work handled, call for a quote and we will confirm coverage at your address.
When a furnace is not working, the visit covers the heat exchanger, igniter, burner assembly, blower motor, and controls. Pressure switches, gas valve function, and the inducer motor are checked as part of the same assessment. The goal is to find what actually failed rather than swap parts and hope.
Common signs include the furnace cycling on and off more frequently than it used to, a noticeable drop in heat output even when the thermostat is set correctly, and unusual sounds like banging, rattling, or a delayed ignition thud. A furnace that has needed more than one repair in a short period, or that is running well past its typical service life, is also worth having assessed before it fails entirely.
Standard heat pumps lose efficiency as outdoor temperatures drop, which made them impractical in Michigan for many years. Cold-climate models are engineered to operate efficiently down to roughly -15 degrees Fahrenheit, which covers the range Macomb County winters actually reach. They run in both heating and cooling modes from a single outdoor unit, which makes them a practical year-round option for Shelby Township homes.
A mini-split is the practical choice when the space being conditioned does not connect easily to the existing duct system, such as a home addition, a finished garage, a detached workshop, or a basement conversion. Running new ductwork through walls and ceilings is disruptive and expensive, and a ductless system handles the same job without it. Multi-zone mini-split setups also allow different rooms to be controlled independently.
The outdoor unit inspection covers the condenser coil, the fan motor and blade, refrigerant line connections, and the electrical components on the unit itself, including the capacitor and contactor. For heat pumps, the reversing valve and defrost cycle are also checked. Blocked or damaged fins are cleaned or noted as part of the same visit.
Uneven temperatures room to room are usually caused by duct leaks, an undersized or oversized system, blocked or closed registers, or a zoning issue in the duct layout. A room that was added after the original system was installed is a common case where the duct system was never sized to reach it properly. We start with an airflow and pressure check to find where the imbalance is coming from.
A rising energy bill with no change in usage usually means the system is working harder to produce the same result. Common causes include a dirty evaporator or condenser coil reducing heat transfer, a refrigerant charge that has dropped, a failing blower motor running inefficiently, or duct leaks sending conditioned air into unconditioned spaces. A diagnostic visit identifies which of those is driving the increase.
A whole-home humidifier ties directly into the furnace or air handler and treats the air before it circulates through the ductwork. The installation involves connecting the humidifier to the supply or return plenum, running a water line to the unit, and wiring the humidistat to the thermostat or control board. Once installed, the humidity level is set at the control and the system manages it automatically across the whole house.
Clear the area around the furnace or air handler so there is room to work, and make sure the outdoor condenser is accessible. If the unit is in a closet, utility room, or basement with items stored in front of it, moving those beforehand saves time. We will mention anything specific to your job when the appointment is confirmed.
For most repair and maintenance work, the technician handles power isolation as part of the visit procedure. You do not need to shut anything off before they arrive. If there is something specific to prepare for your job, we will let you know on the call when the appointment is set up.
Basic maintenance like changing a filter or clearing debris from around the outdoor unit is straightforward and safe for a homeowner to handle. Anything involving refrigerant, the heat exchanger, gas valve, or electrical components on the equipment itself should be left to someone who knows the trade. Getting a diagnosis wrong on those components can make the problem worse and more expensive to fix.
A thermostat replacement starts with checking the existing wiring to confirm compatibility with the new unit. Most programmable and smart thermostats work with standard low-voltage wiring, but some systems require a common wire that older installations do not have. We check the wiring before the new unit is installed and handle any adjustments needed to make it work correctly with the system.
A straightforward repair or tune-up usually takes between one and two hours, depending on what the system needs and how accessible the equipment is. A full system replacement takes longer and is planned as a dedicated installation window. We give you a realistic time estimate on the call when the job is scoped.
A replacement starts with a load calculation to make sure the new equipment is sized correctly for the space. The scope of the job, including equipment type, any ductwork modifications, and what the installation covers, is put in writing before anything is ordered. The installation is scheduled as a dedicated appointment, and the written scope is confirmed before the work begins.
Shelby Township HVAC Company is available every day from 5:30 AM to 10:00 PM. Whether you need a repair diagnosed, a system replaced, or a seasonal tune-up scheduled, the process starts with a call.
Call (586) 789-9445 for a quote, and we will go through what the job involves and what it costs before anything is booked.
Pick up the phone and we'll get started.
Heating and cooling work covers a wide range of jobs, from a single-component repair to a full system replacement, and the right starting point is understanding what the system is actually doing. We handle all of it for homes and businesses across Shelby Township and Macomb County. Call for a quote and we will go through what the service involves and what it costs before anything is scheduled.
| Service | What's Included | Common Needs | Good to Know |
|---|---|---|---|
| Boiler & Hydronic Heating Service | Diagnose no-heat and pressure faultsCheck circulator pump, expansion tank, and controlsInspect heat exchanger and zone valves | Homes with hot-water baseboard or radiant floor heating that is not performing correctly | Boiler faults often show up as uneven heat zone to zone rather than a complete loss of heat, and the diagnostic covers zone controls and the circulator as well as the boiler itself |
| Seasonal Maintenance & Tune-Ups | Inspect and test all major system componentsClean coils and check refrigerant or combustion readingsShare findings and readings at the end of the visit | Homeowners who want to catch small problems before they become expensive ones | Readings are shared at the end of a maintenance visit so you know exactly what the system showed, not just whether it passed or failed |
| HVAC System Installation & ReplacementMost Popular | Load calculation to size the equipment correctlyFull system removal and installationWritten scope before work begins | Homeowners replacing aging equipment or upgrading to a more efficient system | A written scope on installation work is provided before anything is ordered, so the job is defined and priced before the first part arrives |
| Indoor Air Quality & Air Filtration | Install air purifiers and upgraded filtrationAdd ventilation equipment tied to the HVAC systemAddress dust, allergens, and airborne particles | Households concerned about dust, allergens, or stale air circulation | Filtration and air quality upgrades are often installed alongside other HVAC work when the ductwork is already accessible, which reduces the time and disruption involved |
| Heating & Furnace Repair | Diagnose no-heat and short-cycling faultsCheck igniter, heat exchanger, and burner assemblyTest blower motor and pressure switches | Any household where the furnace has stopped working or is not keeping up with demand | Most no-heat calls trace to the igniter, gas valve, or a safety control that tripped, and the diagnosis covers all of those before a repair cost is discussed |
| AC Repair & Service | Diagnose no-cool and warm-air faultsCheck refrigerant charge and coil conditionTest capacitor, contactor, and fan motor | Homeowners whose AC stopped cooling or is running but not keeping up | A system blowing warm air often traces to a refrigerant issue or a failed capacitor, both of which are diagnosed on the same visit before any repair is quoted |
| Cold-Climate Heat Pump Installation | Size and select equipment rated for sub-freezing operationInstall ducted or ductless mini-split configurationsScope written before installation is scheduled | Homeowners looking for a year-round heating and cooling solution that performs through Macomb County winters | Cold-climate heat pumps are rated to operate efficiently down to roughly -15 degrees Fahrenheit, which covers the temperature range this area actually reaches |
| Heat Pump Repair & Service | Diagnose mode-switching and efficiency faultsCheck reversing valve and defrost cycleInspect refrigerant lines and outdoor coil | Homes with a heat pump that is losing efficiency or failing to hold temperature in either season | Heat pumps that struggle in cold weather may have a reversing valve issue or a refrigerant problem rather than a compressor failure, which affects the repair cost significantly |
| Ductwork Repair & Sealing | Locate leaks with airflow and pressure testingSeal supply and return duct connectionsAddress uneven temperatures room to room | Homes with high energy bills or rooms that never reach the right temperature | Duct leaks often send conditioned air into attics, crawlspaces, or wall cavities rather than into living areas, which raises energy use without any change in how the system is operated |
| Thermostat Installation & Smart Controls | Check existing wiring for compatibilityInstall programmable or smart thermostatVerify system response after installation | Homeowners ready to upgrade from a basic thermostat to a programmable or app-controlled unit | Some older systems lack a common wire, which affects compatibility with certain smart thermostats, and we check the wiring before the new unit is installed |
| Whole-Home Humidifier Installation | Connect humidifier to furnace or air handlerRun water line and wire humidistat to thermostatSet humidity control and verify operation | Shelby Township homes where forced-air heating leaves the air dry enough to affect comfort, woodwork, or respiratory health through the winter | A whole-home humidifier treats air across every room through the duct system, which a portable unit sitting in one room cannot replicate |
| Emergency HVAC Service | No-heat and no-cool calls are taken as priority work.Available every day from 5:30 AM to 10:00 PMDiagnosis and repair on the same visit where possible | Any household or property facing a system failure that cannot wait for a routine appointment | When you call about an emergency, the conversation covers what the system is doing and what the visit involves before anyone is dispatched |
| Furnace Repair & Replacement | Full diagnostic of heat exchanger, igniter, and controlsAssess repair versus replacement based on age and costWritten scope provided before any replacement is scheduled | Shelby Township homeowners dealing with a furnace that has stopped working or is approaching the end of its service life | Michigan winters put consistent pressure on heating equipment, and a furnace that has needed multiple repairs recently is worth assessing for replacement before the next cold snap |
How do I know if my AC or furnace is worth repairing or should be replaced?
The decision usually comes down to three things: the age of the equipment, the cost of the repair relative to a new system, and how efficiently the current unit is running. An older system that needs a major component replaced often costs more to keep going than a newer one would cost to run over the same period. We go through those factors on the call and again after the diagnostic, so you have the information you need before committing to either path.
How often should I schedule a maintenance tune-up for my heating and cooling system?
Once a year for each system is the standard starting point. For a home with both a furnace and a central AC, that typically means a furnace tune-up in the fall before heating season and an AC tune-up in the spring before cooling season. Systems that run hard through Macomb County winters benefit from that pre-season check because it catches worn components before they fail under load.
What are the signs that my AC has a refrigerant or airflow problem?
A refrigerant issue usually shows up as an AC that runs continuously but cannot bring the temperature down, ice forming on the indoor coil or the refrigerant lines, or warm air coming from the vents even when the system is running. An airflow problem tends to produce weak output from registers, uneven cooling room to room, or a system that short-cycles. Both are diagnosed on the same visit, and the findings are explained before any repair is quoted.
Emergency No-Heat and No-Cool Calls Handled
A furnace failure in a Michigan winter or an AC that goes down in summer heat is not something to put off. We take those calls seriously every day from 5:30 AM to 10:00 PM, and the conversation covers what is happening and what the visit involves before anything is scheduled.
What causes a system to short-cycle, and should I be concerned?
Short-cycling means the system turns on, runs briefly, then shuts off before the space reaches the set temperature, and then repeats the cycle. It is worth addressing because it puts extra wear on the compressor and blower motor while doing a poor job of conditioning the air. Common causes include an oversized system, a dirty filter restricting airflow, a refrigerant charge that is off, or a failing control component. A diagnostic visit identifies which of those applies.
What do strange noises from my heating or cooling unit usually mean?
Banging or clanking from a furnace often points to a loose or broken component in the blower assembly, or in some cases a delayed ignition that causes a small pop when the burners light. A rattling sound from an outdoor AC or heat pump unit can mean debris inside the cabinet or a failing fan blade. A high-pitched squeal from a blower motor usually means the bearings are worn. None of these are sounds to ignore, because the underlying cause tends to get more expensive the longer it runs.
How does a dirty filter or coil affect system performance?
A clogged filter restricts airflow through the system, which forces the blower to work harder and reduces how much conditioned air actually reaches the living space. A dirty evaporator coil on the indoor unit or a fouled condenser coil on the outdoor unit reduces heat transfer, which means the system runs longer to produce the same result. Both problems raise energy use and put extra wear on the equipment. Changing the filter regularly and keeping the outdoor unit clear of debris are the two easiest things a homeowner can do between service visits.
System Checked Before Parts Are Quoted
We diagnose what is actually wrong before quoting a repair. That means the price you hear is based on what the system needs, not a general estimate built around a common guess.
Do I need to be home when the technician comes out for a repair or tune-up?
For most visits, yes. The technician needs access to the equipment, and for a repair call there are usually findings and options to go over before any work is done. If your situation makes it difficult to be present, mention that when you call and we will work through what is possible.
How do emergency no-heat or no-cool calls work?
When you call about a system that has stopped working entirely, the conversation covers what the system is doing, what the visit will involve, and what the diagnostic covers. We are available every day from 5:30 AM to 10:00 PM, including weekends. Describe the fault, hear what the visit involves, and decide from there.
Findings Written Up After the Visit
At the end of a maintenance or diagnostic visit, the readings and findings are reviewed with you so you leave the conversation knowing what the system showed and what, if anything, comes next.
What does a seasonal tune-up actually cover?
A furnace tune-up covers the heat exchanger, burner assembly, igniter, blower motor, flue, and all safety controls. An AC tune-up covers the evaporator and condenser coils, refrigerant charge, capacitor, contactor, and fan motor. Both include a check of the thermostat and system controls. Readings are shared at the end of the visit so you know what the system showed, not just a pass or fail summary.
Is older equipment worth repairing, or does age alone mean I should replace it?
Age alone is not the deciding factor, but it is part of the picture. A system that is running efficiently, has not needed frequent repairs, and only needs a minor fix is often worth repairing regardless of age. A system that is old, running inefficiently, and facing a major component failure is usually not. The diagnostic tells you which situation you are in, and we go through the options before any repair is started.
How do ductwork leaks affect my energy bill?
Leaking ducts allow conditioned air to escape into attics, crawlspaces, wall cavities, or other unconditioned areas before it reaches the living space. The system compensates by running longer to hit the thermostat setting, which raises energy use without improving comfort. Sealing the leaks returns that lost output to the rooms it was meant to reach, and the improvement often shows up on the next utility bill.
Call us for a quote and we will go through what the job involves, what it costs, and what to expect before anything is booked.
(586) 789-9445